I don’t do this often, but sometimes its such a time-saver. And its a double time saver since that’s one more edge you don’t have to finish later on.
I’ve never gone back to pins since I tried pattern weights. You just plop them down on your pattern pieces, and they keep things from shifting. No more pins in the cutting process. Ever. Again. Use large washers, tape dispensers, your quilting ruler–pretty much anything with weight. I place them around the corners or details of the pattern, and just zip through it. They’re also great for delicate fabrics so you don’t snag anything.
I love these pattern weights and need some more since I use weights all the time. You just plunk them down and cut!
Rotary cutters saves so much time and gives a cleaner cut edge. Use a small size for curves (try the 28mm for awesome smooth curves and no jagged edges). This is another one where I’ve never gone back. I have great dressmaker’s shears and I use them, but not when I’m cutting unless I need to clip corners. The exception to this was when I was making jeans. I used my shears for that, and loved it. I’m not sure why the fabric weight changed my preference on that project.
[disclaim]
I have a couple of rotary cutters and a large mat–here’s what I recommend.
[/disclaim]
Tape the main and pocket pieces together for in-seam pockets and cut them as one piece. It saves time in the cutting and then again in the sewing. This can also work with facings.
This also works for interfacing. I always hate that I cut all the pieces out of my main fabric then remember I have to cut all over again in lining or interfacing. So this literally cuts cut time in half when you’ve got these pieces.
Look closely here and you’ll see that I have my main (navy), lining (plaid), and interfacing all stacked and folded. So instead of cutting 6 separate pieces, I cut once and got all 6 done in one quick step.
You know you have a favorite pattern–just go ahead and cut two out a once. Stack your fabrics, place your pattern, and with just one cut you’ve got double the work done.
Maybe this is a psychological trick, but getting the big pieces out of the way makes it seem like I’ve done most of the work already. Of course, its also a good idea to do this so you have enough fabric for the big pieces, but it seems like a cutting trick too.
This isn’t so much about saving time during cutting, but it works for me. Cut out several patterns while you’re in the groove, and then you’ll be able to enjoy the sewing process for longer without having to come back to cutting. I’ll sometimes cut 5 patterns at a time while my kids play at my feet and then when I have a free minute I can sew not cut.
I like to batch tasks like this with taping and cutting patterns and cutting the fabric, and it really makes the whole thing better.
Maybe you're like me, and you find yourself a creative nomad of sorts. I've always…
As promised in my intro post about the Flora and Fauna fabric that's now out…
There’s An Easier Way to Do That You’ve got all the basic sewing tools, and…
I designed a mini collection of fabric! I feel like shouting it from the rooftops,…
Do you ever get a chance that just feels right and you jump after it…
Tips for building a solid pattern library and saving yourself money in the process.
This website uses cookies.
View Comments
Loving these ideas, thank you for posting them.
Thank you Mary--I appreciate your comment!
Gonna try stacking the fabric/lining/interfacing. My own personal Duh-moment! ha!
I hate going back to cut the interfacing (which I always seem to forget) so stacking them saves me a ton of time.
Going to have to try pattern weights. Question about using a rotary cutter: don't you use a mat underneath? Moving the mat and adjusting the fabric always seems to take longer that just using a scissors.
Hi Audrey,
Yes, I use a mat and suggest the biggest one you can fit/afford. It's true that on really big things like adult pants and tunics I have to adjust but my cutting table isn't much bigger than my mat so I have to do that anyway if I use scissors. But on those bigger things it is easier to use scissors on the floor. Hope that helps!
Ugh! Cutting is the worst! Where are the cutting fairies? I'll have to finally try weights. I usually take and cut, but weights would eliminate a step.
Cutting fairies would be magical. I vote for that.
Thanks for the tips! Using weights and a rotary cutter really speeded it up for me as well indeed... And, since I don't have a sewing room, cutting multiple projects in one session is a big help as well, that way I only have to clear the floor and get out my cutting mat, and another time I can sew all through the pile of ready cut projects.
Yes, the clearing so you can cut is a big one. And I love being able to move from one project to another without having to stop and cut again. Its a mental thing that makes me feel like I'm winning. :)
Cutting the main and the in-seam pocket in one piece is brilliant! I'll have to add that to my repertoire.
By the way, do you mind if I link a mini-post back to this? I think my 3 readers would love to know too. :)
Link away! I'd love for you to share there and on social media!
Great tips! You're using Jedi mind tricks about stacking interfacing and cutting larger pieces first.
Jedi mind tricks are my favorite. ;)
I can't imagine to going back to pinning and then cutting patterns. Rotary cutter FTW!
Yes! Pinning takes so much time!
These are all great tips and many I have jut recently started using...i.e. cutting outer lining and inner together and the big one...using my rotary cutter instead of scissors. This last one also helps with my carpal tunnel! I have not tried the weights. I'll look into that one! Where do you buy yours?
Hi Gina, I actually just use big washers from a home improvement store and other things laying around. Some day I'll invest in actual pattern weights. :)
Thanks for the great tips. As far as pattern weights - to buy they are really expensive. When I was little my mom used empty old 35mm film (yes I'm that old!) cases and filled them with pennies or BB's. I bought some really inexpensive screw top plastic containers at Joanns. They were under 50 cents each. I filled them with BB's that I got at WalMart in the hunting/fishing area. I probably put around $25 into the whole thing and have enough to lay out on my huge cutting table.
I also invested in one of the big mats at Joanns using a 40% off coupon - made it really reasonable. It covers my table perfectly. Love my rotary cutter and metal yardstick (along with other clear rulers).
I use all your cutting tricks except I've never tried the pocket/facing trick. GENIUS!
I also use a cordless electric scissors which helps with thick layers and curves - but again they are pricey (I inherited mine from mom).
Happy sewing and thanks again for the tips!
That's a great idea for pattern weights. I use big washers which are inexpensive and also anything that's sitting around that's heavy. Ha! I'm intrigued by your cordless electric scissors...I'll have to check them out!
Lisa: mine are black and decker cordless power scissors. Amazon sells them for $120. I absolutely love them. Especially for curves on patterns.